When purchasing an air compressor, there are numerous details that are easily unnoticed if you’re not conscious of them! Here are details you should know before purchase of an air compressor.

By: Cas Beld

10 Things You Need to Know When Buying a Reciprocating Air Compressor

Single stage units compress the air in one stroke, from ambient to end pressure. They typically go up to 20 CFM (cubic foot per minute) at a pressure of 125 psi

For more power, you will need a two stage compressor. A two stage compressor uses two stages to compress the air to the end pressure. This means your compressor will have two cylinders/pistons.

The big cylinder is the low pressure stage, while the small cylinder is the high stage. In between the stages the air is cooled.

Two stage air compressors go up to about 50 CFM capacity at about 175 psi.

Whether you need a single or two stage compressor ultimately depends on the amount of capacity (cubic foot per minute) you need.

2. Capacity and pressure

The capacity (CFM) and the pressure of the air compressor are the two most important specifications.

To find out the capacity that you need, simply add up the air consumption of all the air tools that you will use.

Small tools like nailers use only a little air, while big tools like sanders and grinder use lots of compressed air!

To find out the pressure that you need, check again the specifications of the air tools that you plan to use. The highest required pressure dictates the pressure that you need.

It’s always smart to buy a compressor that is capable to deliver more than you need. You will probably add more tools in the future, and almost all compressed air systems will have a leaking hose or coupling somewhere!

Article source here.


Do you know what to look for when purchasing a transportable air compressor? In this editorial you will find all the info that you need to select the right compressor for your specific requirements. Air pressure and Cubic Feet per Minute necessities of both the air compressor and the air tools are all elucidated.

By Author: Benjamin Carson

What to Look for When Shopping for a Portable Air Compressor

Being Familiar With all of the compressor technical terminology is critical when making your compressor purchase decision. Despite the fact that the quantity of compressor types is often overwhelming, selecting the right unit can be made easy by asking a few essential questions.

Performance Ratings:

Matching an air tool or tools Standard cubic feet per minute and PSI demands to an air compressors output capacity is vital. Standard cubic feet per minute or SCFM is the rate of how much air the compressor can produce in just a minute. All tools which are powered by using a compressor come with a SCFM value; this value will point out the air supply that is compulsory for optimum operation of the tool. Therefore, check the standard cubic feet per minute at 90 psi when matching your air compressor SCFM ratings.

See the full article here.


Understanding details of a good air compressor will help you make the best choice. And for your body repair needs we at Guanella will take care of it for you.